According to PC Richards the next time your washing machine is not, working properly, you should try checking all the simple things first well before you call the repairperson. Troubleshooting could save you a lot of time and money. In case you still cannot resolve the issue after you have done all of these simple checks, then it might be moment to call for professional help.
Whether you have a front load washer or a top load washer, here are several common problems, explained by PC Richard professional team that may occur with your machine in addition to easy solutions to fix them.
When the Washer is Vibrating
There are a few possible reasons your washing machine could be vibrating: unbalanced load of laundry, the washer is not level, or the washer feet may not be locked in as well as contacting the floor.
Rearrange the load of laundry and be certain that you are loading your washer correctly in order to avoid shifting. Check your manufacturer’s instruction book; inside you will discover a recommended maximum or optimum load weight. Use that as a guide. When you fill your washer, be sure the clothes have space to move freely and are not packed very tightly.
Check the floor in order to see if it is level. You might have to add a ¾-inch piece of plywood under your washer.
Be certain the washer feet are in firm contact with the floor. Washing machines have adjustable, front leveling legs along with a lock nut. You should adjust each leg to the proper height and then tighten the lock nut up against the body of the machine to keep the leg from rotating.
After adjusting every single leg, lean against the machine and make sure you feel no movement. Some machines have the same type of legs in the rear that should be adjusted; however, most machines have “self-adjusting” rear legs. These legs are set by tilting the entire machine forward onto its front legs with the rear legs about 3 inches off the floor and then setting the machine back down. The legs should adjust automatically.
If your Washer is Leaky
In case your washer is actually dripping water, it does not automatically suggest you will need a major repair. Dripping water could happen because of simple problems like:
The washer is not well balanced or even loaded correctly.
Hoses are not attached/inserted appropriately.
Hosepipe washers usually are worn.
Drains are clogged.
Check to see that your machine is actually well balanced and make certain that the washer basket is not out of alignment causing water to leak out.
Check all your hoses and make certain they are tightened and properly attached. Check the hose washers for cracks or damage.
Check out water lines and faucets to make certain they are not really leaking.
Make sure the washing machine is draining correctly. If it is not, check the drain hose since it may be clogged with lint, hair, or that missing sock.
Whenever the Washer is making Unusual Sounds
Items that are stuck in the washer, clogged drainpipes or internal sensors, may lead to unusual sounds such as clicking, gurgling or humming.
A clicking sound could mean that an object is stuck in the washer drain. Be certain to look at your drain and take away any objects that have been stuck. Make certain to always check out and remove items from pockets prior to washing.
If your washer is creating an unusually excessive gurgling noise, this could signify that the washer drain line is partially blocked. Check out the line and remove the blockage before a real problem can occur.
In case you find out a humming or buzzing sound that may well signify that, something has jammed the pump. Check your pump and get rid of any objects that do not belong. If damage has been done you may possibly require a new pump, advises PC Richards team.
If you are still experiencing issues with your washing machine after following all of these troubleshooting suggestions, it may be time to call up a expert. At PC Richard outlets, they offer these services to you!
Article Source – http://blog.pcrichard.com/common-washing-machine-problems-and-solutions
By geralt from Pixabay