To log into Linksys router, you will first need to leave it blank on the Username field then enter the Router’s password. The password is often set to a default security code of “admin”. When you have proceeded into the login screen you will gain access as well as the authority to alter a plethora of configuration systems for your router. You do not have to be overly frustrated over the huge abundance of options available as the router ships will have its default settings to enable a smooth functioning throughout a majority of cases.
In such environment, the configuration options are entirely depending on your personal selection. If the router you are using is a wireless type then you should consider setting up DSL ISP to convey a unique identification for your router by configuring a WEP code to encrypt unwanted wireless traffic. Firstly you will need to enter the default IP address “192.168.1.1” into your web browser.
The moment the web-based setup page make its appearance, look out for the local IP address column then make amendments to “192.168.2.1” before selecting “Save Settings” to have it stored in the memory. Some people may want to renew their computers’ IP address to log into Linksys router. This can be done in the DOS or Command Prompt field. When you have performed the renewal of your IP address, you can access into the page by typing “192.168.2.1” in your web browser. If the IP address reveals a string of numbers, you can then connect to the internet.
Nevertheless, if the IP address contains only zeros, then click on the “IP address release” or “DHCP release” then select “IP address renew” or “DHCP renew” respectively. This is an important part of setting up DSL ISP process. If the zeros continue to appear, enable the “PPPoE” on your router before checking in the “Status” view to see if the login status appears to be connected. Otherwise, click on connect. By this hierarchy of steps you should be able to gain internet access using your Linksys router.